iX SNMP driver

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
Posts: 4
Joined: Fri Jan 16, 2015 12:00 pm

iX SNMP driver

Post by Ya-hoo »

I am new to SNMP and have a technical question on how my HMI (which is A7) application can talk with Microhard wireless radio through SNMP.
I want my HMI get the TCP connection status, such as signal strength, connection status and display these information. I'd like to know if A7 has SNMP driver available to get information from Microhard wireless radio which can provide .mib file.
I have spare USB and possibly a RS232 port for a gateway.

In this case, is it possible to get the information I need? What is the requirement on HMI side to read it?

I would greatly appreciate your opinion on this matter.

Best regards,

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm

Re: iX SNMP driver

Post by Russ C. »


We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690.

Thank you.
Best regards,

(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB

Post Reply