Connecting a second screen.

Any discussion about hardware that supports iX Developer.
Post Reply
Posts: 1
Joined: Fri Dec 05, 2014 3:16 am

Connecting a second screen.

Post by jbob »

I have 2 T7a screens one has been controlling my process for the last 6 months from a q series mitsi I want to attach a second screen through Ethernet .I have set the screens to different ip addresses ,stopped baud on second screen and set transparent mode to TCP in the tags settings,to no avail. could anyone help..

User avatar
Jae V
Posts: 118
Joined: Wed Jan 15, 2020 11:00 am

Re: Connecting a second screen.

Post by Jae V »

We understand that this is a very old post. As for your set up, transparent mode is not going to be your best bet. You will want to set up a Modbus master and slave configuration and use Data exchange to move values through the master to the new screen. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB

Post Reply