How to change screens based off of a Tag value.

Post Reply
User avatar
Ron L.
Posts: 214
Joined: Fri Jul 15, 2011 3:21 pm

How to change screens based off of a Tag value.

Post by Ron L. »

Create a Tag. The tag can be mapped to to an address on a PLC if that makes more sense for your system. For this example, I'll call the tag, "ScreenTag".

Click on the [...] button under the "Action" column.
tag_action.jpg
tag_action.jpg (82.58 KiB) Viewed 14220 times
Here you can configure the properties of the "ScreenTag" to change screens depending on the value of the tag. For the attached screen shot, if I wanted to change to "Screen1", I would set the "ScreenTag" to be a value of 1.
screen_dynamic_tag_props.jpg
screen_dynamic_tag_props.jpg (69.67 KiB) Viewed 14220 times
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer

User avatar
Chris T.
Posts: 109
Joined: Mon Nov 20, 2017 5:29 pm

Re: How to change screens based off of a Tag value.

Post by Chris T. »

Locked
Best regards,
Christopher
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply