How to upgrade or install a new Control Driver

Locked
mark.monroe
Posts: 824
Joined: Tue Mar 13, 2012 9:53 am

How to upgrade or install a new Control Driver

Post by mark.monroe »

This FAQ describes how to upgrade or install a new controller driver in iX Developer.
Snap 2013-03-04 at 08.23.47.png
Snap 2013-03-04 at 08.23.47.png (98.85 KiB) Viewed 20262 times
1) Right Click on the iX Developer application and select "Run as Administrator"

Untitled.jpg
Untitled.jpg (40.25 KiB) Viewed 20262 times
2) Open up a project, doesn't matter what project it is. Now go to the file menu and select "Update Drivers". If your driver is in a folder on you system, select "Update Drivers From File". Otherwise select "Update Driver From Internet".

Snap 2013-03-04 at 08.34.04.png
Snap 2013-03-04 at 08.34.04.png (12.16 KiB) Viewed 20262 times
Snap 2013-03-04 at 08.34.27.png
Snap 2013-03-04 at 08.34.27.png (19.62 KiB) Viewed 20262 times
3) If you elect to update drivers from the Internet, it will ask you if you want to use a proxy server, you can just press OK. Use the "Mark Newer" button to upgrade all drivers where there is a newer version online. Press the "Download" button to download and install the drivers.

Snap 2013-03-04 at 08.23.47.png
Snap 2013-03-04 at 08.23.47.png (98.85 KiB) Viewed 20262 times
4) Close iX Developer and open it again by right clicking on the iX Developer application and select "Run as Administrator". Your new drivers will now be active. You can now open iX Developer as you normally do, by double clicking on the shortcut.
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer

User avatar
Chris T.
Posts: 109
Joined: Mon Nov 20, 2017 5:29 pm

Re: How to upgrade or install a new Control Driver

Post by Chris T. »

Locked
Best regards,
Christopher
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Locked