Set Limit Upper and Lower at Tag Level

A forum devoted to the discussion of all topics having to do with scripting and other advanced programming using iX Developer.
Post Reply
andrea
Posts: 72
Joined: Tue Dec 11, 2012 5:44 am

Set Limit Upper and Lower at Tag Level

Post by andrea »

Hello,

is it possible to set the limits at a general/common level, for example on tag list so that everywhere the tag is used with also custom code will be checked?

Thank you

User avatar
Jae V
Posts: 118
Joined: Wed Jan 15, 2020 11:00 am

Re: Set Limit Upper and Lower at Tag Level

Post by Jae V »

Hello,
We understand that this is a very old post. But your best bet for setting up a upper and lower limit to a tag value is to use the tag actions in the tag menu. To use it, just go to the tag menu, check the "Others" Check box under the Columns Visible, and then click on the column field under action. Then on value change set up a > and < actions with your limits where if you are outside of your limits, you set the value to the limit. If there is anyone who require assistance setting this up, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us



Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply