What would be the OPC UA namespace to connect to Bedrock PLC

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
Bousquet_SC
Posts: 1
Joined: Fri Jun 29, 2018 1:22 pm

What would be the OPC UA namespace to connect to Bedrock PLC

Post by Bousquet_SC »

I have a X2 pro 7 with a Bedrock SCS10. I can communicate with the PLC using UA Expert and now I would like to communicate with the X2 Pro but I don't know how to set-up the iX developer to communicate with the PLC.

Thanks

Regards

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: What would be the OPC UA namespace to connect to Bedrock

Post by Russ C. »

You can specify an OPC UA server in iX Developer when creating a project or by going to Tags -> Controllers -> and Selecting OPC UA:
OPC_UA server.png
OPC_UA server.png (45.26 KiB) Viewed 4645 times
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply