CoDeSys ARTI driver won't work after update.

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
jorgeraul3
Posts: 6
Joined: Wed Jun 27, 2012 11:17 am

CoDeSys ARTI driver won't work after update.

Post by jorgeraul3 »

I updated the CoDeSys ARTI driver from version 4.01 to 4.07 and now the HMI is not able to communicate with the PLC.

We were using a TxA and since they were discontinued we moved to the X2pro. For this we had to update iX Developer from 2.0 to 2.3 and we have not been able to connect with our PLC over TCP/IP (Level 2 Route).

Please help!

jorgeraul3
Posts: 6
Joined: Wed Jun 27, 2012 11:17 am

Re: CoDeSys ARTI driver won't work after update.

Post by jorgeraul3 »

Never mind. We returned 10 and cancelled an order of another dozen of these HMIs and instead we replaced them with Automation Direct HMIs and are using Modbus to communicate.

Post Reply