iX T15c to Baumueller BMC-M-PLC Ethernet - Comm err

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
foxtreekr
Posts: 1
Joined: Mon Oct 26, 2015 4:07 am

iX T15c to Baumueller BMC-M-PLC Ethernet - Comm err

Post by foxtreekr »

Hello,

I have a IX T15C HMI and a Baumueller BMC-M-PLC .

I used Baumueller bmaxxOS drivers

I communicate by ethernet through a Switch.

problem is some times T15C displayed error message "Error 2 0x10"

Help file linke say "Error 2:0x10 QSMLDG unexpected order"

Could say me what is wrong ?

Thank you

User avatar
Jae V
Posts: 118
Joined: Wed Jan 15, 2020 11:00 am

Re: iX T15c to Baumueller BMC-M-PLC Ethernet - Comm err

Post by Jae V »

Hello,
We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us



Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply