Modbus RTU Slave

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
kkwon2
Posts: 19
Joined: Thu Dec 13, 2012 2:07 pm

Modbus RTU Slave

Post by kkwon2 »

Hi,

We have an A12 panel setup as a Modbus RTU slave.
If the master sends a write register request (40000 reference address),
but specify a non-zero offset, and a number of registers, the data does not appear to get placed in the associated tags. For example if we want to
transfer some registers starting with reference address 40150, an offset
of 150 would be specified.
If a zero offset is used, it seems to work ok.

Regards,
Ken

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Modbus RTU Slave

Post by Russ C. »

Hello,

We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690.

Thank you.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply