Communication problems between IX and Siemens S7-1500

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
fsoares
Posts: 1
Joined: Fri Feb 28, 2014 3:11 am

Communication problems between IX and Siemens S7-1500

Post by fsoares »

Hi,

I have many applications to communicate with Siemens PLCs without problems. In this moment, i'm trying to communicate with the new PLC S7-1500 but without success...
Someone has managed to put the IX communicating with S7-1500?

JohnCZ
Posts: 73
Joined: Wed Jun 27, 2012 1:17 am
Location: CZ
Contact:

Re: Communication problems between IX and Siemens S7-1500

Post by JohnCZ »

Hi,

S7-1500 is successor of S7-300. Theoretically, it is the same as the S7-300. Look at Instruction connection.

BR
JohnCZ

CIAM
Posts: 1
Joined: Tue May 20, 2014 10:00 am

Re: Communication problems between IX and Siemens S7-1500

Post by CIAM »

HELLO,

I also met the problem it is already necessary to put in ix Developer the slot to 1 in the parameters of communication.

Then in TIA Portal it is necessary to go to the cpu and to the properties / protection and checked the box all below to authorize the exchanges towards a HMI.
ScreenHunter_109 May. 20 17.59.jpg
ScreenHunter_109 May. 20 17.59.jpg (102.91 KiB) Viewed 18864 times
ScreenHunter_110 May. 20 18.15.jpg
ScreenHunter_110 May. 20 18.15.jpg (19.33 KiB) Viewed 18864 times
All to work for me with T12B and one s7 1516.

SGC
Posts: 1
Joined: Mon Jul 28, 2014 12:36 am

Re: Communication problems between IX and Siemens S7-1500

Post by SGC »

Hello, ¿any update about this issue?
I'm interested in purchasing an EXTER T70, to communicate with a Siemens S7 1500.
Thanks.

ramaslabas
Posts: 3
Joined: Thu May 08, 2014 3:56 am

Re: Communication problems between IX and Siemens S7-1500

Post by ramaslabas »

CIAM wrote:HELLO,

I also met the problem it is already necessary to put in ix Developer the slot to 1 in the parameters of communication.

Then in TIA Portal it is necessary to go to the cpu and to the properties / protection and checked the box all below to authorize the exchanges towards a HMI.
ScreenHunter_109 May. 20 17.59.jpg
ScreenHunter_110 May. 20 18.15.jpg
All to work for me with T12B and one s7 1516.
Hello,

Having similar problem with iXT7A and 1215.
It look that all communications are set correctly.
Of course IP address is different.
HMI communicates with PLC but returns with error 123

Post Reply