Transfering data from E series to IX panel

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
lawrenceelectrical
Posts: 6
Joined: Sat Sep 28, 2013 9:37 am

Transfering data from E series to IX panel

Post by lawrenceelectrical »

Hi

I have an number of E series 1155 all connected to their own FX3uC serial and have just installed an IX panel to which is connected to a FX3uc all e series are connected via Ethernet port. Is it possible to send data from one PLC to another via an e series (BDTP) to the IX panel.
The existing system is communicating with each others FX3UC using the BDTP, is it possible to do this on the IX panel?


Many thanks

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Transfering data from E series to IX panel

Post by Russ C. »

You can add multiple controllers in iX Developer and point it to the second FX controller and read the values that way from the E1155.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply