Cannot export/import tags

Discussion of application development using iX Developer, including but not limited to getting started, using the functions tab, properties, objects and installation.
Post Reply
Sergei Troizky
Posts: 23
Joined: Mon Jun 13, 2016 4:03 pm

Cannot export/import tags

Post by Sergei Troizky »

The error message on the attached picture appears on attempt to export tags as Excel file. The similar one appears on attempt to import tags.
This happens under 32-bit Win7, as well as under 64-bit Win10.
What may be wrong?
Attachments
iX Tag export error.jpg
iX Tag export error.jpg (249.34 KiB) Viewed 5109 times

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Cannot export/import tags

Post by Russ C. »

I know this is an older post, but were you able to get this resolved? If so, what were the steps to resolution?
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Sergei Troizky
Posts: 23
Joined: Mon Jun 13, 2016 4:03 pm

Re: Cannot export/import tags

Post by Sergei Troizky »

Never solved in v2.2.
The projects was finished in v2.4 (which has own bugs btw).

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Cannot export/import tags

Post by Russ C. »

Oh good, what version of 2.40?

We are aware of some bugs in 2.40 SP4, but what bugs are you experiencing? We'll add them to the list if they're not already.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Sergei Troizky
Posts: 23
Joined: Mon Jun 13, 2016 4:03 pm

Re: Cannot export/import tags

Post by Sergei Troizky »

Both 2.40SP2 and 2.40SP4 intermittently fall into fatal error in Windows 10, and would not open the project anymore. If the source code was not downloaded to the display, the project is then lost.
Ended up running the 2.40SP4 in 32-bit virtual machine under Windows 7 Pro, where it is stable.

Also, the software remains not WYSIWYG. Text location on running display is always different from the design view. Come on, guys, its 21st century.

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Cannot export/import tags

Post by Russ C. »

It sounds like this might be project specific, are you able to replicate it in a blank project with a handful of tags?

If you're able to we can look at your project if you send it to us.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply