Save Report to USB with iX T7F-2

Discussion of application development using iX Developer, including but not limited to getting started, using the functions tab, properties, objects and installation.
Post Reply
ianrobo75
Posts: 12
Joined: Mon Sep 22, 2014 6:15 pm

Save Report to USB with iX T7F-2

Post by ianrobo75 »

With the iX T7A/T10A terminal we are able to trigger a report to be generated on a USB flash drive no problem.

We've now got an iX T7F-2 and coding wise the same options are available (Generate Report / Select File (... to USB destination) / Select the Report).
However, the reports are not getting saved to the USB flash driver, they are ending up on the hard disk, as can be seen by FTPing to ftp://[ix IP]/HardDisk/Reports/

Does anyone know if this is a T7F-2 limitation/bug?

User avatar
Jae V
Posts: 118
Joined: Wed Jan 15, 2020 11:00 am

Re: Save Report to USB with iX T7F-2

Post by Jae V »

Hello,
We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us



Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply