Beijer HMI X2 pro 4 error code

Any discussion about hardware that supports iX Developer.
Post Reply
Posts: 1
Joined: Tue Jul 30, 2019 12:08 am

Beijer HMI X2 pro 4 error code

Post by WesCh »


I'm doing a project with Beijer X2 pro 4 and I'm able to download the project to the HMI without problem. Application starts normally but after a few seconds I get an error message that says "Wrong panel hardware. Terminating application".

I have used the same project in many same types of HMI's without any problems, so in my opinion it shouldn't be the software.

Any ideas what could be the problem?

Thanks in advance!

error code
error code
hmi errorcode.jpg (1.47 MiB) Viewed 4822 times

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm

Re: Beijer HMI X2 pro 4 error code

Post by Russ C. »

What version of iX Developer is the project developed in?
Best regards,

(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB

Post Reply