Ix T7a

Any discussion about hardware that supports iX Developer.
Post Reply
radach
Posts: 2
Joined: Wed Jun 06, 2018 11:38 am

Ix T7a

Post by radach »

Plz help me when i clic analognumeric on panel i have error
Attachments
Screenshot_20180606-193514.png
Screenshot_20180606-193514.png (1.92 MiB) Viewed 7775 times

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Ix T7a

Post by Russ C. »

If you have access to that project and you're able to re-download it to the panel, I would try that and see if that fixes it. It looks like the OnScreenKeyboardCE.exe may have gotten corrupted somehow.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

radach
Posts: 2
Joined: Wed Jun 06, 2018 11:38 am

Re: Ix T7a

Post by radach »

Russ C. wrote:If you have access to that project and you're able to re-download it to the panel, I would try that and see if that fixes it. It looks like the OnScreenKeyboardCE.exe may have gotten corrupted somehow.
this is my own project and my first projetc in this panel.
if you want i can upload it.

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Ix T7a

Post by Russ C. »

I would try clearing off the existing project off the panel and then downloading it again and see if that fixes it.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply