Display white screen after Load BIOS CMOS Default in TA150

Any discussion about hardware that supports iX Developer.
Post Reply
claudia
Posts: 1
Joined: Sat Jul 02, 2016 7:36 pm

Display white screen after Load BIOS CMOS Default in TA150

Post by claudia »

I´m using IX Panel TA150.
After load BIOS CMOS default, HMI display white screen and don´t load USB or SD. Now, I can´t open BIOS SETUP.

It loses BIOS stup? What is happenes?
How can i get/save BIOS/FIRMWARE now?

Please, i need your help.

User avatar
Russ C.
Posts: 213
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Display white screen after Load BIOS CMOS Default in TA1

Post by Russ C. »

Hello,

We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690.

Thank you.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply