SD card

Any discussion about hardware that supports iX Developer.
Post Reply
wlederer
Posts: 175
Joined: Fri Jan 27, 2012 4:20 am

SD card

Post by wlederer »

Can somebody explain how to use SD card in T7A panel?
For example, how to update the HMI-program without a laptop if the new program is written to a SD card?
Or, how to write some data to it from the panel?

regards, Waldemar

mark.monroe
Posts: 824
Joined: Tue Mar 13, 2012 9:53 am

Re: SD card

Post by mark.monroe »

Hi Waldemar,

Here is another forum post where someone has asked a similar question.

You can use the "Transfer" Button with a picture of a folder on it to save your project to a USB Stick. Then plug the USB Stick into the Panel and cycle the power. The panel will find the project on the USB stick and ask is you want to copy that project to the panel.
Snap 2012-04-16 at 08.08.12.png
Snap 2012-04-16 at 08.08.12.png (35.4 KiB) Viewed 7636 times
You can export the database to a USB Stick or External Memory card using the "Database Export" action. You can also access the memory card via a script just like you would the normal file system.
Snap 2012-04-16 at 08.12.31.png
Snap 2012-04-16 at 08.12.31.png (68.22 KiB) Viewed 7636 times
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer

Post Reply