Beijer x2 21 Pro Screen Flicker

Any discussion about hardware that supports iX Developer.
Post Reply
marav
Posts: 1
Joined: Thu Jun 27, 2019 11:45 am

Beijer x2 21 Pro Screen Flicker

Post by marav »

Hello -

I have an interesting hardware issue with a Beijer x2 21 pro panel. The panel is in an enclosure with 1 other identical Beijer panel. Both panels are powered from the same 5A 24VDC power supply, and only 1 panel has had this issue, to date.

I've attached a short video of the issue occurring. I've also confirmed that the voltage to the panel was 23.52V at the time the video was taken.

The panel also has a serial communication module installed - a cIX DP profibus module.

I was wondering if anyone else has seen this behavior with their panel before, and what the fix was.

Thanks!

User avatar
Russ C.
Posts: 212
Joined: Thu Nov 16, 2017 3:32 pm
Contact:

Re: Beijer x2 21 Pro Screen Flicker

Post by Russ C. »

This is an older post, and the video didn't seem to get attached.

But you may try updating the firmware if you haven't already.
It also possible it could be hardware related, so if you haven't already, reach out to us at support using the Contact Us page, and we can create a CRO for this panel.
Best regards,

Russ
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply